Hi would you have any pictures of them..

cheers

hi sorry for delay,havent got any pictures but can do if you wish but there are same as any t4 non-colour coded mirrors apart from being electric,in good working order but n/s mirror glass missing. ta dave

my mirrors are looking a bit tired and they both drop down after a while driving..
and also cant get used to the manual thing as all my other cars have had electric everything.

what size is the switch and can it be mounted on its own in the door card..
and is it a major task to wire them up
cheers Chris..

would you be able to post am only in dorset so could collect at a pinch...

Chris

Those switch's will be easy to fit just need some patientce
they sit on top of the door cards the flat bit you lay your arm on & on the raised bit a few inches back from the A post/mirror

a simple mark out & drill four holes followed by filing square job will do the trick as the switch's should have metal/plastic springs on the back.
They arent very big driver door is slightly wider as it has two switch's.

Loom will be an easy plug n play jobby

But

what is not stated is wether they come with the motors & i cant comment on how these fit & as the wether they need to have the whole winder machanism replaced to fit them.

sorry i had no email notification of posts, if it would help i could make a template of where switch should go as i have the door panels still?

@ rob" wether they come with the motors" yeah they do, regulators,motors, switches, looms & evens bolts but me thinks you are thinking of different post

PM sent....