|
Wanted clutch/brake pedal
|
|
|
|
Date: Saturday, 06/Aug/11, 4.32 PM | Message # 1 |
 Major general
Group: Members
Posts: 372
Status: Offline
From: 05/Jul/10
yup thats right this twat i got the van from has completly bodged it
my clutch cylinder broke today so i thought i will have a look and see whats what well i wish i hadnt
the reason for it breaking is due to the fact the mounting point thats part of the plate/pedal assembly that bolts to the bulkhead has broken (how is beyond me)
so what he has done is bolt an L bracket onto the cylinder then drilled a new hole and mounted the cylinder there instead. what it appears this has done is hold the cylinder at the wrong angle resulting in to much pressure in the wrong direction resulting in the top of the cylinder bar breaking off.
the only way i can see to fix this is get a new pedal assembly remove the old fit the new then replace the clutch cylinder .
To say im not a happy man at the moment is an understatement
so if anyone is scrapping a 2.5 tdi bus ajt engine (although i should imagine the pedal housing would be the same in other models) let me know as i now cant drive at all untill its resolved
a very narked me
\ | |
| |
|
|
|
|
Date: Sunday, 07/Aug/11, 6.51 PM | Message # 2 |
 Colonel
Group: Members
Posts: 231
Status: Offline
From: 10/May/11
Self same issue i had on mine, at least the pedal box had been welded but within a day of having the van the master cylinder started leaking fluid obviously where the box was broken and still being used putting stress on the cylinder.
oh and it was a mickey mouse one compared to the genuine VW one i have on there now..
people who bodge stuff really annoy me...
x | |
| |
|
|
|
|
Date: Friday, 12/Aug/11, 9.05 PM | Message # 3 |
Major general
Group: Members
Posts: 372
Status: Offline
From: 05/Jul/10
no longer needed as i fixed it myself
removed my pedal box cleaned and welded it refitted it put a new clutch cylinder on and bleed it and wow what a difference
now onto the next job
\ | |
| |
|
|
|
|
Date: Friday, 12/Aug/11, 9.22 PM | Message # 4 |
Colonel
Group: Members
Posts: 231
Status: Offline
From: 10/May/11
now onto the next job
it does get a bit like that.... 
x | |
| |
|
|
|
|
Date: Friday, 12/Aug/11, 11.48 PM | Message # 5 |
Major general
Group: Members
Posts: 372
Status: Offline
From: 05/Jul/10
yup new EGR kit next then a debate over keeping standard panel filter or upping it to a K&N jobby
seems to be lacking a bit on the hills
\ | |
| |
|
|
|
|
Date: Saturday, 13/Aug/11, 0.43 AM | Message # 6 |
 Generalissimo
Group: Moderators
Posts: 2519
Status: Offline
From: 06/Sep/09
go for the k&n
only dont buy from tidyt's thay sent me a pipe that dont fit & i ended up going to burtans & buying a samco pipe & clips that do fit.
if you unbolt the sensor from the filter & measure the od of the tube & then buy 1x 90 dgree bend 2x clamps & 1x cone filter = job done
best mod = exhaust = more revs as long as its a decat
Rob. [Secretary]
vwT4T5club@googlemail.com
____________________________________________________
T4 -------- X Pack -------- Blue Thunder AKA The Bat Mobile
Message edited by RS_ROB - Saturday, 13/Aug/11, 0.44 AM | |
| |
|
|
